Environmental Aspects - Teka TR 841 Montageanleitung Und Empfehlungen Zur Verwendung Und Wartung

GB
A pot or pan may become
stuck to the glass due to a product
having melted between them. Do not
try to lift the pot while the hot plate is
cold! This could break the glass.
Do not step on the glass or
lean on it as it could break and
cause injury. Do not use the glass
as a surface for placing objects.
TEKA INDUSTRIAL S.A. reserves the
right to make changes to its manuals
without affecting the product's essen-
tial features.

Environmental aspects

The symbol on the product or
packaging means that this product
cannot be treated like usual house-
hold waste. This product must be
taken to a recycling collection point
for electrical and electronic applian-
ces. By ensuring that this product is
disposed of correctly, you will avoid
harming the environment
public health, which could happen if
this product is not handled pro-
perly. For more detailed information
about recycling this product, please
contact your local authority, house-
hold waste service or the store
where you purchased the product.
The packaging materials used are
environmentally-friendly and can be
recycled completely. Plastic compo-
nents are marked >PE<, >LD<,
>EPS<, etc. Dispose of packaging
materials, like household waste, in
your local container.
Malfunctioning
Before you contact the Technical Service,
please perform the following checks.
The appliance does not work:
Ensure that the power cable is plugged in.
The pot sticks to the glass:
If there is molten material between the
pot and the glass, set the hot plate to
maximum power and try to separate
them.
Message U400 and acoustic warning:
Power surge. Contact your electricity
company.
Continuous beep, control discon-
nected and symbol on display:
There is an object or liquid on the
touch control. Remove any object or
24
liquid on the touch control.
A hot plate disconnects and messa-
ge E2 appears on the display:
If during cooking the temperature in
the control electronics is excessive,
the hot plates near the control might
disconnect to avoid damages. Exces-
sive temperature problems during coo-
king only occur in extreme cases (coo-
king at maximum power for a long
time). In any case, leave the hot plate
to cool down for a few minutes. If the
problem persists, check that the
appliance was installed in accordance
with these manual instructions.
and