Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Choose power level 9. Press the touch
will flash 9 and A alternately. Then
button
again and the power display
power level 6. The system keeps the
press the touch button
hot plate at power level 9 (maximum)
for 2.5 seconds, flashing 6 and A alter-
nately, and then (after 2.5 seconds) it
cooking level 6.
automatically lowers to continuous
CHANGING THE POWER LEVEL
DURING AUTOMATIC COOK START
1 The hot plate must be selected. Its
decimal point (12) must be lit up.
2 Change the power using touch but-
ton
(5).
When the power is increased using the
touch button
(5) the time that has
passed until then is taken into account
Example:
You have chosen power level 1 (1
minute automatic cook start) and after
30 seconds you change it to 4 (6.5
seconds). The automatic cook start
function will be 6 minutes (6.30 minus
0.30).
DISCONNECTING THE AUTOMATIC
COOK START FUNCTION
After at least 10 seconds have passed
since the automatic cook start function
was activated:
1 The hot plate must be selected. Its
decimal point (12) must be lit up.
2 Press the touch button
automatic cook start function will be
deactivated.
Timer function
This function makes the cooking pro-
cess easier because you do not have
to be present: the timed hot plate will
switch off automatically after the set
time has lapsed.
In these models you can time all of the
hot plates separately or together.
Switching the clock on
1 The hot plate must be selected. Its
decimal point (12) must be lit up.
The control light (11) for the selec-
ted hot plate will switch on.
2 Select a power level, from 1 to 9, for
the selected hot plate.
22
display (8) shows 00 and a decimal
3 Press the clock button
point (12) will appear.
to lower it to
4 Using the touch buttons
(5/4) select the time (from 1 to 99
minutes).
The clock will start to count the time
automatically after a few seconds.
If you keep the touch buttons
(5/4) pressed down, the minutes will
go by automatically to allow quicker
selection.
If you want to set the timer for another
hot plate, repeat steps 1 to 4).
Viewing / changing the program-
med time
To view the remaining time on the
clock display (8), just select the hot
plate, and its decimal point (12) and
the control light (11) will switch on.
If you want to change the remaining
time, proceed as follows:
1 The hot plate must be selected. The
decimal point (12) and the control
light (11) for the selected hot plate
must be switched on.
2 Press the clock button
clock's decimal point (12) switches
on.
3 Use the touch buttons
(5/4) to change the time.
Alternatively you can directly press the
(4). The
clock button
the control light (11) for the hot plate
for which you want to view the remai-
ning time switches on. You can then
change the time using the touch button
or
Disconnecting the clock
After the time programmed for the hot
plate has lapsed, you will hear a series
of beeps for at least one minute.
To switch this acoustic warning off,
press any touch button. The hot plate
is then disconnected.
If you want to stop the clock before the
programmed time is up:
1 The hot plate must be selected. The
decimal point (12) and the pilot light
(7). The
or
or
(7). The
or
(7) several times until
(5/4).
for the selected hot plate (11) must
be switched on.
2 Press the clock button
clock's decimal point (12) will switch
on.
reduce the time to 00.
3 Use the touch button
Quick switch-off
Repeat steps 1 and 2.
3 Press the touch buttons
(5 and 4) simultaneously to discon-
nect the clock.
The timer is cancelled but the hot plate
remains activated until you switch it off.
Using the clock as a
stopwatch
Whenever the clock is not timing a hot
plate, it can be used as a stopwatch.
To do so, you must activate it without
any hot plate having been selected.
Connecting the stopwatch
The stopwatch can be activated at any
time, even if another hot plate is timed.
1 Press the clock button
the pilot light (13) underneath the
clock displays (8) switches on.
2 Use the touch buttons
(5/4) to change the time.
The stopwatch is activated, even if the
cooker is disconnected, until the set
time has lapsed, or until you switch it
off.
Disconnecting the stopwatch
If you want to stop the stopwatch befo-
re the programmed time is up:
1 Press the clock button
reduce the time to 00. The clock is
2 Use the touch button
cancelled.
Quick switch-off
1 Press the stopwatch touch button
(7).
2 Press the touch buttons
(5 and 4) simultaneously to discon-
nect the stopwatch.
(7). The
(4) to
and
(7) until
or
(7).
(4) to
and
Werbung
Inhaltsverzeichnis
