Herunterladen Inhalt Inhalt Diese Seite drucken

Use And Maintenance - Teka TR 841 Montageanleitung Und Empfehlungen Zur Verwendung Und Wartung

Glaskeramik-kochfelder mit touch control
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
GB
tacts. This ensures disconnection in
emergencies and allows stovetop clea-
ning.
Only the TEKA official technical servi-
ce can handle or repair the appliance,
including replacement of the power
cable.
Ensure that the inlet cable does not
come into contact with the stovetop
housing or the oven housing, if it is ins-
talled in the same unit.
Warning:
The electrical connection
must be properly grounded, follo-
wing current regulations, otherwise
the stovetop may malfunction.
Unusually high power surges
can damage the control system (like
with any electrical appliance).
Keep the Guarantee Certifica-
te or the technical data sheet toge-
ther with the instructions manual
throughout the product's service
life. These contain important techni-
cal information.
Use and Mainte-
nance
Instructions for Using the
Touch Control
CONTROLS (fig 2)
1
On/off touch key.
Hot plate selection touch keys.
2
Power and/or residual heat dis-
3
plays.
"Decrease" power/time touch key.
4
5
"Increase" power/time touch key.
Double/triple burner selection touch
6
fig. 2
20
button (double or triple burner hot
plate).
7
Timer/stopwatch touch button.
8
Clock display.
Stop function touch button.
9
Hot plate double burner switched on
10
display (only next to double burner
hot plates). There are two displays in
three burner hot plates, one for each
additional burner.
Timed hot plate display.
1 1
Decimal point on displays:
12
Lit up: Hot plate can be operated.
Not lit up: Hot plate locked.
13
Countdown stopwatch display.
* Only visible while running.
The touch buttons activate the con-
trols, and each is linked to a display.
You do not need to exert force on the
touch button, you only need to touch it
with the tip of your fingertip to activate
the function.
Each action is verified by a beep.
SWITCHING THE APPLIANCE ON
1 Press the on touch button
at least one second.
the power displays (3) show a 0 and
The touch control is activated and all of
the decimal point (12) flashes.
If you do not take any action in the next
10 seconds the touch control will
switch off automatically.
SWITCHING SELECTED HOT PLA-
TES ON
Once the touch control is activated
using the touch button
switch on the selected hot plates.
sen hot plate (2). A 0 (3) appears on
1 Press the touch button for the cho-
the power display and the decimal
point (12) lights up, showing that
the hot plate has been selected
(ready to be used).
2 Using touch button
choose the power level.
If you do not press the power touch
button within 10 seconds after you
have selected the hot plate, it will be
deactivated and you will have to select
it again.
The touch buttons
repetitive. If you keep them pressed
down they increase or decrease with a
0.5 second interval.
Only one hot plate can be selected at
the same time (2), in other words, it will
only show one decimal point (12).
Warning: To operate a hot
plate, it must be selected first.
When you can to operate a hot
plate, check that its decimal point
(12) is lit up.
Quick
switch-on
power: Once you have selected the
hot plate, press the touch button
(4) once. The hot plate will be activa-
(1) for
ted at full power.
SWITCHING THE HOT PLATE OFF
1 The hot plate must be selected first.
Its decimal point (12) must be lit up.
the power to 0. The hot plate will
2 Using the touch button
switch off automatically.
Quick switch-off: When you press the
touch buttons
neously, the hot plate will switch off
(1), you can
quickly.
RESIDUAL HEAT DISPLAY
The power display will display an H
when the glass surface reaches a tem-
perature that could cause burning.
When this risk disappears, the display
switches off (if the appliance is discon-
nected), or displays a 0 (if the applian-
ce is still connected).
Switch the hot plate off before the coo-
king time ends to make the most of the
residual heat and save on electricity.
Warning: If while the H is still
displayed there is a power cut and
the power returns immediately, the
residual heat displays will not light
up again, even though the cooking
surfaces are still hot. Bear this in
mind.
or
(5/4),
and
are
at
maximum
(4), lower
and
(5/4) simulta-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis