14
All manuals and user guides at all-guides.com
Light barrier, wicket door contact, safety contact strip
Warning!
Have safety accessories connected by a specialist company.
•
Open terminals 3 and 4 (small screwdriver) (1).
Remove wire jumpers.
•
Insert wires for 3 and 4, tighten (2).
•
Re-attach terminal strip (3).
•
Insert mains plug, conduct performance test.
Note:
If several safety accessories are used, these must be connected in series.
Internal, code, key-operated pushbutton
Attach the button:
– within sight of the garage door,
– away from moving parts,
– attach internal pushbutton at a height of at least 1.5 m.
•
Open terminals 1 and 2 (small screwdriver).
•
Insert wires, tighten (1).
•
Re-attach terminal strip (2).
•
Insert mains plug, conduct performance test.
Note:
If several pushbuttons are used, these must be connected in parallel.