Identification; Nameplate - Grundfos DID Montage- Und Betriebsanleitung

8.4 Identification

8.4.1 Nameplate

1
2
3
4
5
6
Fig. 6 Nameplate on the CU 382 control unit
Pos. Description
1 Manufacturer and country of origin
2 s::can product name
3 Number of sensors
4 Bar code
5 Serial number (S/N)
6 Enclosure class
7 Certification marks
8 QR code
9 Type
10 Voltage [V]
11 Frequency [Hz]
12 Power consumption [W]
13 Humidity limits
14 Temperature limits
1
2
3
4
5
6
7
Fig. 7 Nameplate on the DID
Pos. Description
1 s::can product name
2 Parameter
3 Mounting type
4 Type
5 Part number
6 Bar code
7 Serial number (S/N)
10
8.4.2 Type key
Example: DID-3 BF3-FCL2/TCL2/pH
7
CU 382
control unit
8
variant
9
10,11,12
13
14
Installation
variant
Parameters
/ Sensors
Remarks:
• All sensors include temperature measurement
• Measurement of disinfectant parameters (FCL,TCL, CDI, HP
or PA) is only possible with BF1 or BF3 installation variant
• BF1, BF3 and BT4 installation variants include flow detection
• BF1, BF3 and BT4 installation variants include 1.0 m sensor
cable
• TI1 and TI2 installation variants are only possible for
parameters pH, ORP or CND
• TI1 and TI2 installation variants include 7.5 m sensor cable
• Power cable is not included, please select it from the
accessories list and order separately
Code Description
CU 382-1 for 1 parameter +
DID-1
temperature, 100-240 VAC, 50-60 Hz
CU 382-3 for 3 parameters +
DID-3
temperature, 100-240 VAC, 50-60 Hz
BF1 Bypass flow cell, 1 sensor
BF3 Bypass flow cell, 3 sensors
Bypass flow cell, 1 optical sensor and 3
BT4
additional sensors
TI1 Tank immersion, 1 sensor
TI2 Tank immersion, 2 sensors
FCL2 Free chlorine 0-2 ppm
FCL20 Free chlorine 0-20 ppm
TCL2 Total chlorine 0-2 ppm
TCL20 Total chlorine 0-20 ppm
CDI2 Chlorine dioxide 0-2 ppm
CDI20 Chlorine dioxide 0-20 ppm
HP2 Hydrogen peroxide 0-200 ppm
HP20 Hydrogen peroxide 0-2000 ppm
PA2 Peracetic acid 0-200 ppm
PA20 Peracetic acid 0-2000 ppm
pH pH 2-12 pH, up to 10 bar, 70 °C
ORP, -2000 mV to +2000 mV, up to 10
ORP
bar, 70 °C
Conductivity, 1-500000 µS/cm (2-42
CND
PSU), up to 20 bar, 70 °C
Turbidity in drinking water, 0-800 FTU/
TURB
NTU
Turbidity in drinking water, 0-800 FTU/
TURB/ NTU, total or dissolved organic content
ORG TOCeq / DOCeq 0.1- 25mg/l and
UV254 0-70 Abs/m