Cosmo CPH 2.0 Montage- Und Betriebsanleitung Seite 46

COSMO High‐efficiency pump CPH 2.0
Instantaneous flow in m3/h
Instantaneous delivery head in m
Instantaneous
Height of selected curve (1‐2‐3)
Display symbols:
power consumption in watts
The corresponding values are displayed for 3 seconds. The display goes off at the end
of the selection cycle – only the LED for the operating mode stays on.
If the mode selection key is pressed within 10 seconds, all 6 symbols are displayed,
which then returns to the standby mode.
If the mode selection key is pressed again within 10 seconds, further 11 display cycles
are shown to provide a longer reading time.
46