Insulating The Pump Housing; Electrical Connections - Cosmo CPH 2.0 Montage- Und Betriebsanleitung

COSMO High‐efficiency pump CPH 2.0
7.3.6. Insulating the pump housing
Heat losses via the CPH 2.0 pump housing can be reduced by fitting the thermal
insulation shells that are included in deliver as standard.
Do not insulate the control cabinet or cover the control panel.
7.4 Electrical connection
No external motor protection is required for the circulation pump.
Note:
All electrical connections, safety devices, and fuses must be installed by a suitably
qualified and authorized electrician, under observance of the applicable
regulations and standards such as the VDE Guidelines as well as local regulations.
To ensure a correct electrical installation, the instructions given in this section of
the manual must be strictly observed.
41