Pepperl+Fuchs FD0-BI-Ex12.PA Betriebsanleitung Seite 18

Connections
The clamping areas of the Sensor Interface FD0-BI-Ex12.**** are protected by scre-
wed lids.
1
1 Clamping area for connecting field devices
2 Clamping area for connecting device to fieldbus
3 Protective lid for field device connections
4 Protective lid for fieldbus connection
Ambient Temperature
The device may be operated at an ambient temperature ranging from -20 °C ... +70 °C .
Repair and Maintenance
The devices must not be repaired, changed or manipulated. If there is a defect, the pro-
duct must always be replaced with an original device.
Delivery, Transport and Storage
Check the packaging and contents for damage.
Check if you have received every item and if the items received are the ones you orde-
red.
Keep the original packaging. Always store and transport the device in the original pak-
kaging.
Always store the device in a clean and dry environment. The permitted storage tempe-
rature (see datasheet) must be considered.
4
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49-621-776-0 • USA +1-330-4253555 • Singapore +65-67-799091 • Internet www.pepperl-fuchs.com
2
Instruction Manual
FD0-BI-Ex12.PA
3 4
Copyright Pepperl+Fuchs, Printed in Germany