Suction Pads/ Seals; Vacuum Filter; Warning Device (Audible) - probst SH-1000-MINI Bedienungsanleitung

Maintenance and care
7.3

Suction pads/ seals

•
Remove items and contaminations such as adhesives, glue, saw dust, dust etc. from the seals at least once a week. Use
glycerin to clean the seals.
•
Immediately replace damaged seals (those with tears, holes, ripples).
•
Do not use petrol (gasoline) to clean the device. It is highly flammable and its fumes are hazardous. Use cold-cleaning
solvent. Do not smoke while cleaning.
Do not use aggressive or corrosive fluids to clean the device. The vacuum hose will otherwise become leaky or be
destroyed.
7.4

Vacuum filter

•
Check the filter at least once a week, blow the filter cartridge out (from the inside to the outside).
Do not knock the filter!
When it is contaminated heavily, replace the filter cartridge.
•
Do not allow dust to enter into the suction opening when removing the filter cartridge.
7.5

Warning device (audible)

See the warning device operating instructions (appendix)
5240.0020 V4
32 / 34
GB