Setting The Hour Format - Auerswald COMfortel 600 Bedienungsanleitung

Note: If the date (only day and month) and time are transmitted over your
connection as a part of the CLIP information associated with a call, this time
is automatically accepted by the telephone. For more information about the
settings required to operate the telephone on an Auerswald PBX, see
page
Press the Menu key.
1.
Use the arrow keys to scroll to the SET TIME & DATE menu.
2.
Press the OK key.
3.
Enter the current hour. Possible entries:
4.
Repeat step 4 for minutes, month, date and year.
5.
Note: The currently set year is used to calculate the weekday.
If you would like to disable the display of the weekday, press one of the ar-
6.
row keys.
Note: If you would like to change the entries again, repeat steps 4 to 6.

Setting the Hour Format

You can show the time on the display in a 12- or 24-hour format.
Press the Menu key.
1.
Use the arrow keys to scroll to the HOUR FORMAT menu.
2.
Press the OK key.
3.
Use the arrow keys to scroll to the hour format you want.
4.
Press the OK key.
5.
Note: If you would like to change the hour format again, repeat steps 3 to 5.
COMfortel 600 - Setup and Operation Guide V03 01/2016
51.
The hour shown on the top left of the display is blinking.
Up to 2 digits
Digits 0 to 9
Now the minute display is blinking.
The number of the weekday (for example, 5 for Friday) is blinking.
This deletes the number of the weekday.
The currently set hour format is now displayed.
Operation and Configuration
57