Setting The Date Format; Setting The Contrast; Setting The Dial Mode - Auerswald COMfortel 600 Bedienungsanleitung

Operation and Configuration

Setting the Date Format

You can set the display to show the date in a day/month format (DD-MM) or a
month/day format (MM-DD).
Press the Menu key.
1.
Use the arrow keys to scroll to the DATE FORMAT menu.
2.
Press the OK key.
3.
Use the arrow keys to scroll to the date format you want.
4.
Press the OK key.
5.
Note: If you would like to change the date format again, repeat steps 3 to 5.

Setting the Contrast

The display contrast can be adjusted in four levels.
Press the Menu key.
1.
Use the arrow keys to scroll to the LCD CONTRAST menu.
2.
Press the OK key.
3.
Use the arrow keys to scroll to the display contrast you want.
4.
Press the OK key.
5.
Note: If you would like to change the display contrast again, repeat steps 3
to 5.

Setting the Dial Mode

The telephone supports dual-tone multifrequency (DTMF/tone dialling) and
pulse dialling (PD). Only activate pulse dialling if the connection on which you
operate the telephone does not support DTMF/tone dialling.
Press the Menu key.
1.
Use the arrow keys to scroll to the DIAL MODE menu.
2.
Press the OK key.
3.
58
The currently set date format is now displayed.
The currently set display contrast is now shown.
The currently set dial mode is displayed.
COMfortel 600 - Setup and Operation Guide V03 01/2016