VDO Cyclecomputing X-Serie Bedienungsanleitung Seite 14

D GB F I
1. Display
The display can be divided
into 5 sections:
Section 1
always shows
the current time.
Section 2
shows the current cadence,
if the cadence transmitter is
installed (optional).
You will also find
indicator elements
on the display
You can find the description
of the individual indicators
on the right hand side.
26 X2DW
Service indicator
shows that your bike should go for a service.
You can set the service interval individually for
bike 1 and bike 2
Section 3
shows the Stopwatch indicator
current speed. shows that the stopwatch is still running whilst
you have retrieved other information on the
display
Section 4
shows the value of the Indicator bike 1/bike 2
display function/ The computer can work with two different set-
information that you tings for 2 bikes. The indicator shows which of the
selected. two bikes you have chosen to use.
The total distances are accordingly counted and
Section 5 stored separately for bike 1 and bike 2.
shows the description of
the selected function in
the top line (info line). The The computer can display both KHM and MPH.
second line (menu line) Distances are shown in kilometres or miles
shows, accordingly.The indicator shows the selected
whether there is more measurement unit
B
information „MORE"
whether there is
B
another selection
option „SELECT"
VDO CYCLECOMPUTING www.vdocyclecomputing.com
to speed (average)
The computer compares the current speed
with the average speed.
The indicator shows
B
B
B
When a submenu has been accessed, these indi-
cators flash and show that there are other selec-
tion options or that the computer is waiting for
an entry (setting mode).
Measurement unit (KMH or MPH)
I F GB
Speed difference indicator (current)
whether the current speed is higher than
the average (+1 KMH)
below the average (-1 KMH)
or matches the average
(tolerance +/- 1 KMH).
Menu prompt indicator
X2DW
D
27