VDO Ocean Line Combi Montage- Und Bedienungsanleitung Seite 48

3.4.11 Selection of display indications (Screens on / off)
Here select which measured values are to be displayed in normal
operating mode.
The following options are available:
YES Here all measured values and their ISO symbol are shown in
succession. You can remove the measured value from normal
operating mode by selecting NO. If the measured value is to be
redisplayed, select YES when the ISO symbol of the measured
value is shown.
NO No changes have been made to the settings.
3.4.12 Activation of the simulator mode (Simulator Mode)
Here select whether the simulator mode is to be activated.
The following options are available:
YES The simulator mode is activated. The indicator now generates and
displays random values for all measured values. The measured
values are also transmitted to connected instruments.
NO The simulator mode is deactivated.
Ensure that the simulator mode remains active after activation or
deactivation of the indicator, if it is not deactivated via selection of NO.
A flashing "SIM" text appears in the display, if the indicator is in
simulator mode.
3.4.13 Exit settings (Exit Setup)
Here select whether the settings are to be exited.
The following options are available:
YES The settings are exited, the indicator restarts in normal operating
mode.
NO The settings are restarted again.
47