Inhaltszusammenfassung für VDO LOGIC MULTIFUNCTION
Seite 1
VDO LOGIC MULTIFUNCTION Montage- und Bedienungsanleitung Installation and Operating Instructions VDO Kienzle Vertrieb und Service GmbH ...ein Mannesmann-Unternehmen...
Seite 2
Montage- und Bedienungsanleitung Seite 1 - 30 Installation and Operating Instructions Page 31 - 60 Inhaltsverzeichnis Content...
Sicherheitshinweise: Benutzen Sie zu der Interpretation der angezeigten Wer- te zusätzlich auch immer Ihre seemännische Erfahrung! Inhaltsverzeichnis...
Seite 7
Bestandteile der Anlage Inhaltsverzeichnis...
Seite 8
Die Installation des Anzeigers Die Bohrschablone Inhaltsverzeichnis...
Seite 9
Die elektrische Installation Anschlußbezeichnung: Inhaltsverzeichnis...
Seite 10
Die Verbindung mit LOGIC: z.B. LOGIC Compass z.B. LOGIC Log/Depth z.B. LOGIC Wind Inhaltsverzeichnis...
Seite 11
Begriffe (Abkürzungen) Inhaltsverzeichnis...
Seite 13
Die Bedienung der LOGIC MULTIFUNCTION Um von einem Fenster zum nächsten zu gelangen, wird die jeweili- ge Taste mehrfach gedrückt. Die L/D Taste 17.6 19.8 Inhaltsverzeichnis...
Seite 24
Falls zum Zeitpunkt der Programmierung der MULTI- FUNCTION das jeweilige Haupt- oder Tochtergerät eben- falls programmiert wird, kann es zu Wartezeiten bei der Rückkehr in den normalen Anzeigemodus kommen. Dies ist besonders dann kritisch, wenn gleiche Informa- tionen bearbeitet werden. Es kann einige Zeit vergehen, bis der Wert im Hauptge- rät tatsächlich geändert wird.
Seite 25
Beispiele zur Programmierung Inhaltsverzeichnis...
Seite 28
8888888 ############ 8888888 ############ Inhaltsverzeichnis...
Seite 29
Fehlersuche Allgemeine Hinweise: 1. Niemals Kabelanschlüsse an- oder abklemmen, wenn die Bordspannung eingeschaltet ist. 2. Alle elektrischen Anschlüsse sorgfältig vor Inbetrieb- nahme der Geräte nach Installationsplan überprüfen. Inhaltsverzeichnis...
Seite 35
Dokument gehört immer an Bord! Manual should always be kept on board! PREFACE Content...
Seite 36
The VDO LOGIC MULTI FUNCTION In the LOGIC instrument system the LOGIC Multifunction serves as in- dependent indicator which can show all relevant data as well as it can program the most important navigational functions of the LOGIC main appliances.
Parts Supplied The VDO LOGIC MULTIFUNCTION consists of: Indicator Covering cap Part kit including mounting pieces (2 x) rubber mat drilling template installation and operating instructions warranty certificate For example X10.719/002/001 (6-lines) or X10.719/002/002 (12-lines) can be used as connection and junction cable. This cable can be pur- chased per meter.
Seite 39
The Installation of the Indicator The drilling template Content...
Seite 40
The electrical Installation Designation of connections: Content...
Seite 41
The Connection with LOGIC z.B. LOGIC Compass z.B. LOGIC Log/Depth z.B. LOGIC Wind Content...
Seite 44
Operating the LOGIC MULTIFUNCTION In order to get from one window to the other, the respective key is pushed once more. The L/D Key 17.6 19.8 Content...
Seite 55
If programming of the MULTIFUNCTION at the respec- tive main appliance and the auxiliary appliance are car- ried out at the same time, waiting times for the return to the usual indication mode can occur. This may become critical in case the same information is being processed.
Seite 59
8888888 ############ 8888888 ############ Content...
Seite 60
Trouble shooting General Remarks: 1. Never connect or disconnect any cables, when power is switched on. 2. Check all electrical connections carefully before in- stallation of the appliances according to the installati- on plan. Content...
Seite 64
VDO Kienzle Vertrieb und Service GmbH Kruppstraße 105 D-60388 Frankfurt am Main 08 600 846 A Tel.: (069) 40805-0 Ausgabe/Edition 03/95 Fax: (069) 40805-177...