Carrying Out Initialisation - Kessel Comfort PLUS Einbau- Und Betriebsanleitung

5.2 Overview of configuration menu
(1) The number of the menu item is
shown in the top line of the display.
5.3

Carrying out initialisation

During initialisation, the following input is expected:
|Language|
|Date / Time|
|Product type|
|System variant|
|Power rating|
|S1 / S3 operation|
|Maintenance interval|
Language
► Press OK.
010-700_02
► Use the cursor keys to select the language and confirm
with OK.
✓ Menu
|Date/Time|
Date / Time
► Set the respective flashing figure in date and time and
confirm with OK.
✓ Menu
|Product type|
Product type
► Select product type and confirm with OK.
Selection affects which setting options are available.
✓ Menu
|System variant|
System variant
► Select the product variant. The product variants can be
found in the respective manufacturer's documents.
Selection affects which setting options are available.
✓ Menu
|S1 / S3 operation|
S1 / S3 operation
► Select the operating mode. The operating mode is noted
in the technical data of the respective pump.
✓ After the last input, the menu
val|appears.
Maintenance interval
► Enter the maintenance interval specified in the standard.
✓ Initialisation is completed, control unit is ready.
Installation and operating manual
appears.
appears.
appears.
appears.
|Maintenance inter-
57 / 220