Kessel Comfort PLUS Einbau- Und Betriebsanleitung Seite 49

Mono/Duo level sensor (non-ATEX)
Connect the cable ends of the level sensor to the Probe2 ter-
minals. The connection of level sensors is identical for both
Mono and Duo systems.
Wire colour Name on PCB
(-)Black
Probe2
(+)Red
Overview of connections for the level sensor
Use KESSEL junction box (art. no. 28799) to lengthen the
connection cable of the level sensor.
010-700_02
Terminal colour
blue
black
Installation and operating manual
49 / 220