Tare (Tare Function) - Silvercrest HG02308 Bedienungs- Und Sicherheitshinweise

In the imperial / avoirdupois system:
– Fluid ounces (fl´oz) water:
– Fluid ounces (fl´oz) milk:
Press the ON / OFF button
weighing mode. The measuring unit is shown under or to
the left of the weight indication in the LC display
Press and hold the ▼ UNIT button
to change the unit of weight (g / lb:oz).
The weight of "0" is shown in the LC display
suitable bowl or container on the weighing surface
and press the ▲ ZERO / TARE button
weight "0" is shown in the LC display
the bowl / container is no longer included.
Place the item to be weighed in the bowl / container. The
weight of the item is shown in the LC display
Note: If no button is pressed for 2 minutes and the
weight is not changed, the readout in the LC display
always returns to the clock mode.

Tare (TARE function)

You can set a weight of "0" again, so that you can weigh out
another item.
Note: A small circle-symbol appears in the left of the LC display
as soon as the product is switched on. A weight of "0" is
5
shown and ready for weighing. The circle-symbol disappears
as soon as the TARE function is used or place an item on the
weighting surface
To do this press the ▲ ZERO / TARE button
message "TARE" appears in the LC display
weight of "0" is shown in the LC display
32 GB/IE
"WATER" is shown in the
LC display.
"MILK" is shown in the
LC display.
3
.
2
. The product is now in
for about 2 seconds
6
. Again, the
7
. The weight of
5
7
.
5
.
5
. Place a
5
2
.
5
5
once. The
. Again, a
5