Mode Selection; Toggling Between Weighing Units; Tare Function/Reset - Silvercrest IAN 330794 1907 Bedienungs- Und Sicherheitshinweise

Switching the product off: Press
and hold the on/off switch /Z 5 for
about 2 seconds . The LC display 4 will
turn off then .
After 2 minutes of inactivity, the product
switches off automatically .
˜ Mode selection
The product has 5 different modes .
One mode is used to determine the
weight . The other 4 modes are used to
determine the volume of oil, flour, water
and milk .
Press the M button 6 to select the
desired mode . In normal weighing
mode, there is no triangular arrow
shown on the LC display 4 . For the
other 4 modes, a triangular arrow points
to Water, Milk, Oil or Flour .
˜ Toggling between
weighing units
Press the U button 7 to toggle to
another weighing unit .
In normal weighing mode, you
can choose between grams (g),
pounds:ounces (lb:oz) and ounces
(oz) .
You can choose between millilitres (ml),
fluid ounces (fl'oz) and cups (CUP) in
the modes for determining the volume .
NOTES:
If you select gram (g) in normal
weighing mode, fluid ounces (fl'oz)
cannot be displayed in volume mode .
If you select pounds:ounces (lb:oz) or
ounces (oz) in normal weighing mode,
millilitres (ml) cannot be displayed in
volume mode .
The volume of flour can only be
expressed in cups (CUP) .
˜ Tare function/Reset
Briefly press the on/off switch /Z 5 .
The LC display 4 shows 4 horizontal
lines for a short moment . The value 0 is
then displayed .
If the foodstuff have been already
placed in the measuring jug 1 , the LC
display 4 will still read 0 .
Place the item you wish to weigh in the
measuring jug 1 . The LC display 4
will show the weight of the item you are
weighing .
Pressing the on/off switch /Z 5
will change the LC display 4 from the
reading to "0" . The letter T will appear
in the lower left corner of the LC display
4 .
To display the weight of the foodstuff
item again, briefly press the on/off
switch /Z 5 again . The letter T goes
off and the reading will change back to
the total weight of the foodstuff .
If you remove the foodstuff item after
using the tare function, a negative value
is displayed . Briefly press the on/off
switch /Z 5 to reset the scale to 0 .
GB/IE 25