Setting Up The Product; Operation; Setting The Units And The Weighing Mode - Silvercrest HG02308 Bedienungs- Und Sicherheitshinweise

Note: If you need to reset the time, press and hold the
T-SET button
described above.

Setting up the product

Place the product on a solid, flat, non-slip surface.
This product is equipped with non-slip rubber feet. Furni-
ture surfaces may be made of a variety of materials and
are treated with many different types of cleaning agents.
Therefore, it is not possible to entirely exclude the possibil-
ity that some of these materials contain substances that
could corrode and soften the product's rubber feet. If pos-
sible, place an anti-slip mat under the feet of the product.

Operation

Setting the units and
the weighing mode
You can choose between metric and imperial / avoirdupois units
of weight. For the range 0 g–999 g, the measurement unit is in
g; from 0 oz–15.9 oz, the measurement unit is shown in oz.
For the range from 1000 g onwards, the measurement unit is
in kg; from 16 oz the measurement unit is shown in lb:oz. Like-
wise, you can weigh liquids, in which case briefly press the
▼ UNIT button
the LC display
In the metric system:
– Millilitre (ml) water:
– Millilitre (ml) milk:
until the time display blinks. Proceed as
4
until the desired measurement unit is shown
6
.
5
"WATER" is shown in the
LC display.
"MILK" is shown in the
LC display.
GB/IE 31