Tare (Tare Function) - Silvercrest IAN 285527 Bedienungs- Und Sicherheitshinweise

In the imperial / avoirdupois system:
– Fluid ounces (fl´oz) water:
– Fluid ounces (fl´oz) milk:
Press the ON / OFF button
weighing mode. The measuring unit is shown under or to
the left of the weight indication in the LC display
Press and hold the ▼ UNIT button
to change the unit of weight (g / lb:oz).
The weight of "0" is shown in the LC display
suitable bowl or container on the weighing surface
and press the ▲ ZERO / TARE button
weight "0" is shown in the LC display
the bowl / container is no longer included.
Place the item to be weighed in the bowl / container. The
weight of the item is shown in the LC display
Note: If no button is pressed for 2 minutes and the
weight is not changed, the readout in the LC display
always returns to the clock mode.

Tare (TARE function)

You can set a weight of "0" again, so that you can weigh out
another item.
Note: A small circle-symbol appears in the left of the LC display
as soon as the product is switched on. A weight of "0" is
5
shown and ready for weighing. The circle-symbol disappears
as soon as the TARE function is used or place an item on the
weighting surface
To do this press the ▲ ZERO / TARE button
message "TARE" appears in the LC display
weight of "0" is shown in the LC display
"WATER" is shown in the
LC display.
"MILK" is shown in the
LC display.
3
.
2
. The product is now in
for about 2 seconds
6
. Again, the
7
. The weight of
5
7
.
5
.
5
. Place a
5
2
.
5
5
once. The
. Again, a
5
GB 15