BTS M30E0-_ _ _-H0001-S04G
Infrared Temperature Sensor
14
Errors are shown by means of an information display on the screen as well as by the LEDs. When multiple errors are
present at the same time, the one with higher priority is displayed.
14.1
Display
14.2
Display
30
Downloaded from
www.Manualslib.com
Error Handing and Display
Error Displays
Meaning
Defect/data loss
Short circuit on digital output
OUT1
Short circuit on digital output
OUT2
IO-Link communication loss
Overtemperature (sensor
electronics)
Load on analog output is outside
the specification
Note
Pressing any key clears the
display.
Undervoltage < 10 V
Undervoltage IO-Link <18 V
Other Info Displays
Meaning
This function is temporarily unavailable since for example the corresponding IO-Link
function is active.
IO-Link data storage or block parameterizing is active. No local parameterizing is possible.
The device is resetting itself to the factory defaults.
Operating hours counter (individual) is being reset to 0.
Key lock active. Key lock can be lifted by holding down [▲▼].
english
manuals search engine
Indicator LEDs
Priority
(flashing)
indica-
tion
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
Outputs
Off
(high-impedence)
Off
(high-impedence)
Off
(high-impedence)