Error Handing And Display; Error Displays; Other Info Displays - Balluff BTS M30E0-UUI-H0001-S04G Betriebsanleitung

BTS M30E0-_ _ _-H0001-S04G
Infrared Temperature Sensor
14

Error Handing and Display

Errors are shown by means of an information display on the screen as well as by the LEDs. When multiple errors are
present at the same time, the one with higher priority is displayed.
14.1

Error Displays

Display
14.2

Other Info Displays

Display
30
english
All manuals and user guides at all-guides.com
Meaning
Defect/data loss
Short circuit on digital output
OUT1
Short circuit on digital output
OUT2
IO-Link communication loss
Overtemperature (sensor
electronics)
Load on analog output is outside
the specification
Note
Pressing any key clears the
display.
Undervoltage < 10 V
Undervoltage IO-Link <18 V
Meaning
This function is temporarily unavailable since for example the corresponding IO-Link
function is active.
IO-Link data storage or block parameterizing is active. No local parameterizing is possible.
The device is resetting itself to the factory defaults.
Operating hours counter (individual) is being reset to 0.
Key lock active. Key lock can be lifted by holding down [▲▼].
Indicator LEDs Priority
(flashing) indica-
tion
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
LED ON
LED OUT1
LED OUT2
Outputs
Off
(high-impedence)
Off
(high-impedence)
Off
(high-impedence)