Rotating The Screen Display; Timeouts; Timeout Menu; Indicator Leds - Balluff BTS M30E0-UUI-H0001-S04G Betriebsanleitung

BTS M30E0-_ _ _-H0001-S04G
Infrared Temperature Sensor
5
5.6
The IR temperature sensor has an internal orientation sensor. Depending on the orientation of the sensor when
installed the display content is automatically rotated and thus adjusts to the viewer. The orientation sensor is enabled
by default. If desired the orientation sensor can be disabled from the menu. The display orientation can also be set
from the menu (see 11.4 Display Settings on page 27).
5.7
5.7.1
The display contrast is automatically reduced 2 min after the last time a button was pressed. After 10 min without
pressing a button the display is turned off. Pressing any button turns the display on again. If key lock is enabled, the
contrast is reduced after 2 s without pressing a button, and the display is turned off after 10 s. In alignment mode the
display is turned off after 30 min and teach-in after 10 min.
5.7.2
The menu for parameterizing the sensor is automatically exited 1 min after the last time a button is pressed. After
enabling key lock, in alignment mode or teach-in turning off the display automatically returns from the menu.
5.7.3
Normal
Aligning the sensor
Teach-in
Key lock active
5.8
Display element
LED OUT1 (yellow)
– LED on
– LED off
– LED flashes
LED OUT2 (yellow)
– LED on
– LED off
– LED flashes
LED ON (green)
– LED lights up
– LED off
– LED flashes (ratio t
– LED flashes (ratio 1:1)
5.9
All parameters which can be set using the buttons can also be set via the IO-Link interface if present. A teach-in can
be performed at the same time only using one of the two interfaces.
14
Downloaded from www.Manualslib.com
Operating Element and Display (Local User Interface)

Rotating the Screen Display

Timeouts

Timeout Display

Timeout Menu

Overview
Menu is terminated
1 min
30 min
10 min
10 s

Indicator LEDs

/t =9:1)
on off
Local User Interface & IO-Link Interface
english
manuals search engine
Display contrast is
reduced
2 min
–
–
2 s
Function
Temperature threshold digital output 1
Upper switching threshold exceeded
Lower threshold exceeded
Error (see section 14 Error Handing and Display on page 30)
Temperature threshold digital output 2
Upper switching threshold exceeded
Lower threshold exceeded
Error (see section14 Error Handing and Display on page 30)
Power indicator
Sensor ready
Sensor not ready
IO-Link communication
Error (see section14 Error Handing and Display on page 30)
Display is turned off
10 min
30 min
10 min
10 s