Symbols - Balluff BTS M30E0-UUI-H0001-S04G Betriebsanleitung

BTS M30E0-_ _ _-H0001-S04G
Infrared Temperature Sensor
5
Operating Element and Display (Local User Interface)
5.10
www.balluff.com
Downloaded from www.Manualslib.com

Symbols

Peak value detection
Averaging
PNP
NPN
Push/Pull
Normally Open
Normally Closed
Turn-off threshold OUT1
Turn-on threshold OUT1
Turn-off threshold OUT2 (if OUT2 = digital output)
Turn-on threshold OUT2 (if OUT2 = digital output)
Analog output signal rising with increasing temperature value
Analog output signal falling with increasing temperature value
Value can be increased or decreased
Setting can be changed
Value cannot be increased or decreased
Press [↵] to continue with the next step
Temperature of the background is too high.
To teach the background the temperature value of the background must be 1% of the detection range less
than the temperature value for teaching the object.
IO-Link communication active
Key lock active
Info
Special evaluation procedure active
(Averaging or peak value detection)
Temperature value increasing
Value can only be increased
Temperature value decreasing
Value can only be decreased
Temperature value is below the lower detection range limit
Temperature value is over the upper detection range limit
manuals search engine
english 15