Sensor Alignment - Balluff BTS M30E0-UUI-H0001-S04G Betriebsanleitung

BTS M30E0-_ _ _-H0001-S04G
Infrared Temperature Sensor
13

Sensor Alignment

Device Aligning can be used to align the IR temperature sensor with the target object. The last sensor measurement
values are continually displayed as bars. Arrows on the right side of the display indicate whether the measurement is
rising or falling. Use [▲] and [▼] to shrink or expand the measuring range section, which can be especially useful for
fine adjustment.
www.balluff.com
Downloaded from www.Manualslib.com
Note
If the temperature value exceeds the upper limit of the measuring range section, this limit is automatically
adjusted to the temperature value.
Note
The measuring range section can only be reduced if the temperature value is within the current measuring
range section.
manuals search engine
1 Increasing temperature value
2 Continual refreshing of the temperature value
1
3 ► Use [▲] and [▼] to shrink or expand the measuring range
2
section.
3
english 29