Silvercrest SSVS 1000 A1 Bedienungsanleitung Seite 25

CAUTION – PROPERTY DAMAGE!
Do not add any foods to the water bath unless they are
►
firmly sealed . Any water getting into the food will produce
unfavourable results or spoil the food .
Ensure that the appliance, the mains cable and the plug do
►
not come into contact with heat sources such as hotplates or
naked flames .
Never place the appliance near sources of heat .
►
Never open the housing . If you do, it can no longer be as-
►
sured that the appliance is safe, and the warranty will be
invalidated .
Allow the appliance to cool down completely before clean-
►
ing and stowing it away it .
In the case a malfunction occurs on the appliance, an error
►
code will blink on the display . When the error codes "Er1",
"Er 2", "Er 3" or "Er 6" are displayed, switch off the appli-
ance immediately, pull the mains plug out of the socket and
contact the Service Hotline (see Section Service) .
The error code display "Er4" informs you that the appliance
is not in the water . Handle the appliance as described in
the Section Preparing the appliance . The error code
display will then go out .
The error code display "Er5" informs you that the water
temperature is too high . Switch the appliance off, take it out
of the water and let it cool down . Then continue the cooking
process with water at a temperature that is below the tem-
perature that is programmed (see Section Programming
the appliance) . The error code display will then go out .
■ 22
Downloaded from www.Manualslib.com
│ GB│IE
manuals search engine
SSVS 1000 A1