Cleaning The Floor Nozzle (Turbo Brush) - hanseatic VC-PD510-2 Gebrauchsanleitung

6. Reinsert the roller (39) and the
locking latch (53). The locking
latch must 'click' into place.
Care and maintenance Page EN-29
Cleaning the floor
(53)
nozzle (turbo brush)
(39)
CAUTION
Risk of injury!
Improper handling of the ap-
pliance may result in injury.
Never touch moving parts
■
of the appliance and acces-
sories, e. g. the fl oor brush.
There is a risk of fi ngers be-
coming trapped.
Always remove the fl oor
■
brush from the telescopic
tube or suction hose before
cleaning.
• Vacuum the underside of the
floor nozzle (turbo brush) (14)
now and then with the crevice
nozzle (17).
If the floor nozzle (turbo
brush) (14) is no longer working
properly:
1. Remove the floor nozzle (turbo
brush) (14) from the tube ex-
tension (11) or from the suction
tube (8).