(11) (23) (24)
2. Insert the connector (23) on
the tube extension (11) into the
opening (24) on the suction
tube (8).
(25)
Make sure that the connector
pins (25) slide into the open-
ings (26).
(8)
(26)
Start-up Page EN-15
(14)
(27) (28)
3. Select a nozzle, e. g. the floor
nozzle (turbo brush) (14), and
insert the connector (27) of
the floor nozzle (14) into the
opening (28) on the tube ex-
tension (11).
Make sure that the connector
pins (25) slide into the open-
ings (26).
You can also attach all
nozzles to the appliance
directly.
All filters have already been in-
serted at the manufacturing plant.
Your vacuum cleaner is now ready
to use.
(11)