hanseatic VC-PD510-2 Gebrauchsanleitung Seite 51

Start-up
Unpacking the
appliance
NOTICE
Risk of damage!
Improper handling of the
appliance may result in dam-
age.
Do not use sharp objects to
■
unpack the appliance.
1. Unpack the appliance.
2. Carefully remove all parts of
the packaging, plastic profiles,
tape and foam padding.
Mounting the wall
bracket
WARNING
Risk of injury!
Improper installation of the
appliance can lead to injury.
Before drilling the holes,
■
ensure that no wires or
cables (power, gas, wa-
ter etc.) will be damaged
(check with a line locator).
Start-up Page EN-13
NOTICE
Risk of damage!
Improper handling of the
appliance may result in dam-
age.
Check the condition of the
■
wall before mounting the
wall bracket.
You should mount the wall brack-
et before setting up the appli-
ance.
Screws and wall plugs
You will need:
- 2 round-headed screws
- 2 suitable dowels
Tools and aids
You will need:
- Screwdriver
- Drill with drill bit suited to the
nature of the wall
- Measuring tape / ruler
- Level
- Pencil
The upper drill hole must
be at least 102 cm above
the ground.