Philips PerfectDraft HD3620 Bedienungsanleitung Seite 23

Problem
Too much foam comes
out of the appliance.
The foam head is too high. See chapter 'How to pour a perfect beer'.
The beer that comes out
of the appliance is flat.
The foam head collapses
very quickly.
The keg fell, can I still use
it?
The beer tastes bad.
cooling
The temperature on the
display goes up (HD3620).
Solution
Make sure that the tap unit is placed correctly on the keg (see chapter
'Preparing for use', section 'Placing the tap unit onto the keg').
Make sure you open the tap completely when you pour beer (see chapter
'How to pour a perfect beer').
The beer is too warm. Wait until the beer is cold enough to be poured,
i.e. when temperature on the display is green (HD3620 only) or when the
green indicator light goes on (HD3610).
The keg has been shaken too much. Wait half an hour for the beer to
settle.
The first glass can contain more foam than usual. Try pouring a second
glass.
The tube may not function properly. Contact the PerfectDraft call centre in
your country to obtain a new tube.
Check if the keg has been open for over 30 days and check if the expiry
date of the keg has passed.
Perhaps the glasses you used were not clean enough. Rinse the glasses with
water and some washing-up liquid. Rinse them thoroughly with cold water
to remove all grease and soap residues
Pour beer as described on the keg and in this user manual (see chapter
'How to pour a perfect beer').
Perhaps the glasses you used were not clean enough. Rinse the glasses with
water and some washing-up liquid. Rinse them thoroughly with cold water
to remove all grease and soap residues.
Make sure the beer is cold enough to be poured, i.e. when temperature on
the display is green (HD3620) or when the green indicator light goes on
(HD3610).
When it is an unopened keg and it does not have any visual damage, you
can try to use it. When the keg is already open, you cannot use the keg
anymore and have to install a new keg.
Make sure you keep the appliance plugged in all the time. Once the keg
has been opened and is kept cool, the beer stays fresh for 30 days. Check
the expiry date on the keg before you install a new keg.
Always clean the tap unit and place a new tube into it when you install a
new keg.
Make sure you use clean glasses.
Make sure that the doors are properly closed (see chapter 'Preparing for
use', section 'Placing the keg into the appliance').
During hot days, put the appliance in a cooler place.
EnglisH
23