Herunterladen Inhalt Inhalt Diese Seite drucken

Electromagnetic Fields (Emf); Before First Use; Installing The Appliance - Philips PerfectDraft HD3620 Bedienungsanleitung

Bierzapfanlage
Vorschau ausblenden Andere Handbücher für PerfectDraft HD3620:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

EnglisH
8
-
To avoid the risk of explosion, do not expose the keg to direct sunlight
or temperatures higher than 30°C.
-
The keg is under pressure. Do not remove the connection top or
pierce the keg with a sharp object.
caution
-
Always read and follow the instructions and safety warnings on the keg
before you install it in the appliance.
-
Do not shake the keg.
-
Store an open keg at the right temperature by leaving it in the
appliance. Make sure the appliance is switched on. If you switch off the
appliance because you are not going to use it for a longer period (e.g.
a holiday), always remove the open keg from the appliance and put it
in the fridge. Once a keg has been opened, the beer stays fresh for 30
days.
-
Always check the expiry date on the keg when you buy it and before
you install it.
-
Do not use the keg if the connection top is damaged. If the connection
top is damaged, the tap unit does not fit onto it.
-
Unopened kegs keep best when you store them at a stable
temperature. The cooler you store the keg, the better.
-
Maximum working pressure: 1.5 bar.
-
Use the keg only for the HD3620/HD3610/HD3600 PerfectDraft. Do
not connect other equipment to the keg.
-
Do not use kegs from other suppliers than the ones mentioned in this
user manual (see chapter 'Keg suppliers').
-
Do not use damaged kegs in this appliance, as this could harm the
appliance. Return a damaged keg immediately to the shop where you
bought it.
-
The kegs are not stackable.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.

Before first use

installing the appliance

1
Put the appliance on a horizontal, even and stable surface. Leave at
least 10cm free space around the appliance for the best performance.
Note: Do not put the appliance in a place where it is exposed to direct sunlight
or to high temperatures (e.g. close to a cooker or an oven).

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Perfectdraft hd3610

Inhaltsverzeichnis