Other Indications - Philips PerfectDraft HD3620 Bedienungsanleitung

EnglisH
14
- When 30 days have passed, the display shows that the keg needs to be
replaced. A dash and an exclamation mark appear on the display.
adapting the freshness indication
- If you want to switch off the appliance for a longer period (e.g. a
holiday), store the opened keg in the fridge. Disconnect the tap unit,
rinse the top of the keg, rinse the tube and store the tube with the keg
in the fridge.
Always write down the date and the number of days that the beer inside
the keg is still fresh on the keg (see number of days on the display).
- When you reinstall the opened keg, you can set the freshness indicator
to the correct number of days with the – and + buttons.
Tip: To calculate the correct number of days: compare the date with the one
you have written on the keg and subtract the number of days the keg lay in
the fridge from the number you wrote on the keg when you stored it.
Before you reinstall the opened keg, clean the tap unit and the tube again.
Also check if dirty deposits have developed on top of the keg. If so, do
not use the opened keg but use a new one.

other indications

Besides the beer level and temperature, the display gives the following
information:
- Green dash with no level indication visible = the tap unit is not present
on the keg.
- Red dash with no level indication visible = no keg is installed.
- Red or green dash with flashing yellow-orange background light = the
tap unit and/or tube are not properly placed. Remove the keg and
check if the tap unit and the tube are properly placed. See chapter
'Preparing for use', sections 'Placing the tap unit onto the keg' and
'Placing the tube into the tap unit'. If this does not help, try another keg
with a new tube.
lED indicator lights (HD3610 only)
- There are three indicator lights on top of the appliance that show the
status of the appliance.
- Red indicator light = the appliance is switched on and you have to
install a keg.
- Orange indicator light = the appliance is cooling the keg and the keg
has not yet reached the right drinking temperature.
- Green indicator light = the beer has reached the right drinking
temperature and is ready to be poured.
other indications
- Red indicator light flashes = the tap unit and/or tube are not properly
placed.
How to pour a perfect beer
Follow the instructions below to pour a perfect beer.