Philips PerfectDraft HD3620 Bedienungsanleitung Seite 19

Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
removing the cooling element
The cooling element inside the appliance contains a substance that
may pollute the environment. Therefore you must remove the cooling
element before you discard the appliance.
You can also take or send the appliance to a Philips service centre. The staff
of this centre will remove the cooling element for you and will dispose of it
in an environmentally safe way.
Only remove the cooling element when you discard the appliance.
Be careful of the paste on the cooling element and adjacent parts. If this
paste ends up on your clothes, it causes a permanent stain.
Remove the cooling element in the following way:
1 Unplug the appliance.
2 Slide the release button to the right to open the doors.
There are two holes near the hinges of the doors on either side.
3 Remove the four screws located in these holes with a screwdriver.
4 Remove the back cover from the appliance.
5 Pull the cooling fan out of the appliance.
Now you see an aluminium plate with fins on it and with two screw
,
holes.
EnglisH
19