Philips PerfectDraft HD3620 Bedienungsanleitung Seite 18

EnglisH
18
3 Tilt the keg with the assembled tap unit towards you and take it out
of the appliance.
4 Press on the release buttons on both sides of the tap unit (1). The
tap unit is released from the keg with a click and you can remove it
(2).
You have to remove the tap unit from the keg before you can replace the
tube.
Always replace the tube when you install a new keg. Never use a tube for
more than 30 days.
5 See chapter 'Preparing for use' for instructions on how to place the
tap unit on the keg and how to place the keg into the appliance.
cleaning
Clean the appliance when you replace the keg or when you store the
appliance for a longer period.
Never use scouring pads, scouring agents or aggressive liquids such as
petrol or acetone to clean the appliance.
1 Always unplug the appliance before you clean it.
2 Clean the outside of the appliance with a damp cloth.
3 Always clean the tap unit as described in chapter 'Replacing the keg'
to avoid sticky beer residues.
4 Remove and disassemble the drip tray and the drip tray cover.
5 You can remove the tap handle by pulling it out of the tap body.
6 Clean the tap unit, the drip tray and the drip tray cover with hot
water and, if necessary, some washing-up liquid.
Hot water may cause burns. Always check if the water is not too hot
before you clean these parts under the tap.
Only the drip tray, the drip tray cover and the spout are dishwasher-proof.