Philips PerfectDraft HD3620 Bedienungsanleitung Seite 17

Step European (except Germany
and UK)
7 Fill the glass until the beer
almost flows over the rim of
the glass.
8 Close the tap in one
smooth movement.
9 a. Move the glass away from
the spout to prevent drops
of beer from falling onto the
foam head.
b. Remove the foam that rises
beyond the rim of the glass
by passing a skimmer over the
rim of the glass at an angle
of 45°.
10 Your beer is now ready to be
served.
German
a. Let beer flow into the
glass until it contains two-
thirds beer and one-third
foam.
b. Close the tap and put the
glass down for 1 minute to
allow the foam to settle.
c. Repeat steps 2 to 6 and fill
the glass up to the rim.
Close the tap in one
smooth movement.
Move the glass away from
the spout to prevent drops
of beer from falling onto the
foam head.
Your beer is now ready to
be served.
replacing the keg
The keg is empty when only foam comes out of the spout and no beer.
HD3620 only: the display also indicates that the keg is empty.
1 Press the release button to the right to open the doors.
Make sure you open the doors fully.
2 Lift the blue locking levers completely.
EnglisH
17
British
Fill the glass until the
beer almost flows
over the rim of the
glass.
Close the tap in one
smooth movement.
Move the glass away
from the spout to
prevent drops of beer
from falling onto the
foam head.
Your beer is now
ready to beserved.