Philips PerfectDraft HD3620 Bedienungsanleitung Seite 11

6 Make sure the release buttons on either side of the tap unit stick
out equally far on both sides. If this is not the case, press the release
buttons on both sides with your thumbs until you hear one click
or two clicks in quick succession.
Placing the tube into the tap unit
1 Insert the flexible tube into the tap body.
2 Slide the projections of the tube connector under the hinge points.
3 Push the tube connector into the opening in the tap unit ('click').
Placing the keg into the appliance
Never place the keg into the appliance if you have not assembled the tap
unit and the tube properly. See sections 'Placing the tap unit onto the
keg' and 'Placing the tube into the tap unit' in this chapter.
EnglisH
11