Temperature Indication; Level Indication - Philips PerfectDraft HD3620 Bedienungsanleitung

cooling
After you have installed the keg, the appliance automatically starts to cool
the keg.
Note: At an ambient temperature of 23°C, chilling an uncooled keg takes 12-
15 hours.
Tip: If you want to pour beer shortly after placing the keg in the appliance,
prechill the keg in upright position in the fridge for a while before you install it.
For more tips, see chapter 'Troubleshooting'.
1 Wait until the beer has reached the right drinking temperature.
HD3620: The temperature is shown on the display in green (see
,
section 'LCD display' in this chapter).
HD3610: The temperature light lights up green (see section 'LED
,
indicator lights' in this chapter).
lcD display (HD3620 only)
, The display shows the temperature of the beer, the beer level inside
the keg and the freshness of the beer.

temperature indication

Wait until the temperature of the keg has dropped below 4°C before you
start to pour beer. The ideal drinking temperature is 3°C.
The colour of the temperature displayed tells you if the beer has reached
the right drinking temperature.
- Red = the beer temperature is not yet ideal for consumption (above
4°C). The beer head may be too large.
- Green = the beer has reached the right temperature (4°C or below)
for consumption.

level indication

The yellow-orange level indication on the display shows the amount of
beer left in the keg in eight steps.
Note: If you use 20cl glasses, you can pour approx. 30 glasses of beer from
one keg. If you use 33cl glasses, you can pour approx. 18 glasses.
Freshness indication
The freshness indication tells you how long the beer is still fresh.
- When you place a new keg in the appliance, the freshness
indication shows that the beer in the keg stays fresh for 30 days. The
indication counts down from 30 to 0 days.
- Once the keg has been opened, the beer stays fresh for 30 days if the
keg is stored in the appliance
Make sure the appliance is switched on all the time.
EnglisH
13