Product Description; Introduction - Mettler Toledo InPro 8000 Serie Bedienungsanleitung

InPro
1.
1.1
© 01/04 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
Downloaded from www.Manualslib.com
® 8000 Series

Product description

Introduction

We thank you for your decision to purchase a METTLER TOLEDO
InPro ® 8000 Series fiber optic measuring sensor with operation based on
the principle of backward scattered light.
Please keep this instruction manual in a safe place where it is readily to
hand for users of this sensor. If you have any questions regarding function
of the sensor and ancillary equipment, or if you consider that the descrip-
tions/instructions do not tally or are lacking, please contact your nearest
METTLER TOLEDO Authorized Distributor, who will be pleased to provide
assistance.
Markings
The markings labeled on each sensor state the following information:
METTLER TOLEDO
Serial no. xxxxxx
The code following the model designation of the InPro
InPro ® 8200 Sensors as printed on the package label provides information
on the shaft material, sealing material for the optical window (if present),
and the length of the shaft in mm.
e.g. InPro ® 8200/S/Kalrez
with S = stainless steel shaft DIN 1.4435 or 1.4404 (316L)
Kalrez ® -FDA 6230 window seal
shaft length = 205 mm (8.07").
In addition:
H = Hastelloy C276 shaft
Epoxy = Epoxy bonded window
See also chapter 7.1: Ordering information sensors.
manuals search engine
Order no. 52 xxx xxx
® -FDA/205
5
® 8100 and
InPro ® 8000 Series
52 800 247