Eu Declaration Of Conformity - Cellfast Ergo 55-410 Bedienungsanleitung

Automatische schlauchbox

Vorschau ausblenden

Inhalt

Seite von 49

/ 49
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

WARNING! Failure to comply with the safety precautions may

cause damage of the product or be hazardous to its user and/

or people nearby.

ASSEMBLY INSTRUCTIONS: Choose an installation location for

the wall bracket which will prevent flooding indoor rooms if the

product leaks water. The installation location should be within

the reach of the connection hose (5) connected to the product

and the water tap. The product does not include any wall plugs.

Select the wall plugs which are suitable to the wall material

and the wall bracket bolt hole size.

Wall bracket installation (Fig. C)

1. Place the wall bracket (8) against the wall at the selected

installation location and mark the bolt hole pattern on the wall.

2. Secure the wall bracket (8) to the wall with 4 screws and wall

plugs compatible with the bolt hole size and the wall material

at the marked locations (it is recommended to use washers

between the bolt heads and the wall bracket).

Hang the automatic hose reel (11) on the wall bracket (8) se-

cured to the wall (Fig. E). Do this by releasing the lock tabs into

the position shown in (Fig. D). Engage the lock tabs with the

wall bracket and secure with the wall bracket pin (9). If the wall

bracket pin is difficult to insert, press it inward while twisting it

a little in either direction.

OPERATION (Fig. F): Connect the connection hose (5) to the

water tap with the parts (6-7) or another spout connector

compatible with your water tap. Open the water tap valve.

UNWINDING THE HOSE: Unwind the hose from the reel to the

required length. The reel winding lock is engaged every 50 cm

of hose length and a click is heard every time it is engaged.

WINDING THE HOSE: Approach the automatic hose reel with

the free garden hose end and release the reel winding lock by

pulling a small length of the hose out. The hose starts wind-

ing up on its own at a safe and steady speed controlled by

the integrated winding brake. The reel winding lock gear will

click when unwinding and winding the hose. Before winding

the hose back into the automatic hose reel, undo all knots and

kinks along the unwound length of the hose.

OPERATING CONDITIONS: The product can be operated be-

tween 10°C and 60°C of ambient temperature and supplied

with 6 bars of water pressure maximum. It is best to choose an

installation location away from direct sunlight for as long as

possible to prevent unnecessary overheating of the product.

PRODUCT ADJUSTMENT (Fig. B): You can reposition the hose

stop collar (4) if needed. Caution! Hold the hose (3) when the

hose stop collar (4); otherwise, the hose might be wound up

completely into the reel housing. If this happens, contact the

nearest Cellfast authorized service. 1. Use a screwsdriver to

release 2 bolts (4.1) on the hose stop collar (4). 2. Grasp and

hold the hose firmly while repositioning the hose stop collar

(4). Retighten the 2 bolts (4.1) with the hose stop collar in the

new position.

MAINTENANCE: the product is maintenance-free.

TIP: Mind the hose winding action. Before winding the hose

back into the reel, clean it of heavy soil and dirt, otherwise the

automatic hose reel might not wind the hose back properly.

AT THE END OF WORK WITH THE PRODUCT: Before winding

the hose, close the water tap valve and open the sprinkler at-

tached to the hose end to release the water from the hose.

TROUBLESHOOTING: If the hose is difficult to wind into the au-

tomatic hose reel (because the hose is knotted or kinked, etc.),

close the water tap valve, unwind the full length of the hose,

remove all its knots and kinks, and try to wind the hose back

in. If this does not help, contact the nearest Cellfast author-

ized service. No spare parts are commercially available for this

product (except for quick connectors, the universal connector

and the sprinkler). If the product requires warranty or post-war-

ranty repairs, contact the nearest Cellfast authorized service.

REPLACING THE HOSE: For safety reasons, have the garden-

ing hose replaced by Cellfast's authorized service only.

TRANSPORT: Handling: Graps the carrying handles (10) and

remove the wall bracket pin (9) up while slightly twisting it left

an right.

STORAGE / WINTERIZING: Keep the automatic hose reel pro-

tected against freezing in winter.

WARNING! To avoid accidents and injury, mind the product

weight (8.3 kg / 18.5 lbs) when choosing the storage location.

NOISE EMISSION: the winding action of the product generates

an average noise level of 85 dB.