Air-System; For The Installer - attika Q-TEE I Bedienungsanleitung

English

air-system

When mounting the air system ensure that the air control system provides fresh air from
the outside, either through a flex tube to the back side or bottom side of the stove.
In order for the air system to function, you have to ensure in the structure that no vacuum
occurs in the housing.

for the installer

finally before firing the stove for the first time a check should be made to ensure that the
assembly and stove installation has been satisfactory and that there are no leaks in any
seals in the appliance and appliance connections to the chimney.
ensure that the appliance and chimney flue are functioning correctly before finally hand-
ing over to the user. If necessary read the later parts of this manual for guidance on care
required when first lighting.
Inform the user that the appliance has been commissioned and ready to use and give
instruction on the safe operation of the stove.
These Instructions must be left with the user and the user should be instructed to keep
them in a safe place.
operating instructions
please note that HeTaS ltd appliance approval only covers the use of dry
seasoned wood logs on this appliance. HeTaS ltd approval does not cover
the use of other fuels either alone or mixed with the wood logs, nor does it
cover instructions for the use of other fuels.
70
RAIS/
100 mm
flex tube
attika
- User manual for RAIS Q-Tee II
back side
connection
bottom
connection