61
Failure to comply with this means the water softener cannot work.
The flange surface of the built-in rotary flange must be in a vertical position! The built-in rotary flange must
be fitted so that mechanical stresses cannot occur!
Otherwise mechanical damage can result, the pipe may burst or the built-in rotary flange can break. This
can result in major water damage. In this case, persons close to the water softener are exposed to a health
risk due to the large quantities of water.
Therefore, during installation, ensure that no large forces act on the pipe, built-in rotary flange and water
softener.
5.6
MOUNTING THE WALL SUPPORT COMPONENTS
console set
wall support
Fig. 4: Wall support components
The wall support provides the device with safe support and prevents the device from rotating around the
pipe. When mounting the wall support (order no. 2201227), please refer to the corresponding assembly
instructions. The console set (order no. 2201231) mainly serves for fixation and reducing the burden of
the pipe.