Menu Functions - Conel CLEAR Serie Montage- Und Betriebsanleitung

68
6.2

MENU FUNCTIONS

By pressing the main menu is accessed:
 
By pressing or
In the submenu the respective value is decreased or increased by pressing
ing <OK>.
Submenus:
· Regeneration
/ Manual regeneration start (see chapter 6.3 "COMMISSIONING")
· Settings
/ Language (DE, EN, FR, NL, IT)
/ Residual hardness (see chapter 6.3.1 "SETTING THE RESIDUAL HARDNESS")
/ Residual hardness correction (see chapter 6.3.3 "RECALIBRATION OF RESIDUAL HARDNESS")
/ Backlight: adjustable from 0 % to 100 %
/ Contrast: adjustable from 10 % to 100 %
/ Factory setting (see chapter 6.13 "RESETTING TO FACTORY SETTINGS")
/ Hardness unit (°dH, °e, °f, gpg, ppm, mmol/l, mval/l)
· Operating data
/ Total amount of raw water since commissioning [m³]
/ Total number of regenerations since commissioning
/ Total number of performed maintenances since commissioning
· Info
/ Device no.
/ Software version
/ Number of days until next maintenance
Main menu
· Regeneration
the next or previous submenu is shown and accessed by pressing <OK>.
 
or and accepted by press-