72
6.11
RESETTING TO FACTORY SETTINGS
All user-defined settings can be reset to the factory settings as follows:
Press
. The display will show the following:
Press
. The display will show the following:
Press <OK> once and then
Press <OK>. The display will show the following:
Press
or
to change between <yes> and <no>.
When <yes> is selected, the following default values are restored by pressing <OK>:
/
Raw water hardness 20 °dH
/
Backlight 80 %
/
Contrast 80 %
6.12
DISPLAY MESSAGE OVERVIEW
Display
Wartung/
Service
Achtung!
Salzmangel
Hauptmenü
· Regeneration
Hauptmenü
· Einstellungen
five times. The display will show the following:
Einstellungen
· Werkseinstellg.
Werkseinstellg.
<nein>
Description
Message shown after an annual
maintenance period.
Shown after value falls below mini-
mum chlorinating flow.
Further information
see chapter 9.4 "MESSAGE "MAINTE-
NANCE/SERVICE""
see chapter 6.6.1 "MESSAGE IN CASE OF
INSUFFICIENT SALT"