Faults - Conel CLEAR Serie Montage- Und Betriebsanleitung

7

FAULTS

The opening of the units and the replacement of the water pressure charged parts
may only be effected by authorized personal in order the ensure the unit security
and its tightness.
Help with faults:
Display text
Achtung! Störung
Reg. Antrieb
Achtung! Störung
Besalzung
Achtung! Störung
Lso-Elektrode
Achtung! Störung
Tastatur
Deleting the fault:
/ Press <OK>.
or
/ Disconnect the power supply from the socket and plug it back in after approx. 5 seconds.
If you contact the customer support please always keep ready device number and
order number (see fig. 8).
Cause
Regeneration drive is defective.
Salting process faulty, salt contain-
er too full or leaking.
Level electrode is defective.
Keypad is defective.
Remedy
Contact customer service! Unplug power
supply! If available, switch the bypass valve
to bypass operation!
Check brine level in salt container! Delete
the fault! If failure persists, contact custom-
er service!
Delete the fault! If failure persists, contact
customer service!
Delete the fault! If failure persists, contact
customer service!
73