Maintenance; Cleaning; Warranty And Services; Inspection By The Operator Every Two Months (Visual Check) - Conel CLEAR Serie Montage- Und Betriebsanleitung

74
8

MAINTENANCE

8.1

CLEANING

Use only clear, clean drinking water to clean the housing.
Domestic all-purpose cleaners and glass cleaners can contain up to 25 % solvents or alcohol (spirits) and
may not be used.
These substances can chemically attack the plastic parts, which can lead to brittleness or even fractures.
These kinds of cleaners must therefore not be used!
9

WARRANTY AND SERVICES

Regular inspection and routine servicing are indispensable in order to continue to achieve a successful pro-
cess for many years after the unit is put into service.
In the building services sector this is covered by DIN EN 806-5.
We recommend you to sign a maintenance contract.
A maintenance contract is the best way to ensure a good operating function beyond the warranty period.
Wherever possible, the regular servicing work and supply with consumables, minerals, salt and wearing
materials, etc. should be carried out by the specialist trade or the factory's customer service department.
9.1
INSPECTION BY THE OPERATOR EVERY TWO
MONTHS (VISUAL CHECK)
In order to comply with the legal warranty claim, it is necessary to carry out an inspection at least every
2 months.
The operator checks:
/ The salt level.
/ The tightness of the water softener (water leakage).
/ Damage to the water softener. Defective parts must be replaced by the customer support.
/ Messages on the display.