Carrying Out A Test Sequence Set With Vde Organizer - TESTBOY TV 465 PRO Bedienungsanleitung

®
Testboy TV 465

Carrying out a test sequence set with VDE Organizer

10.1.20
General meaning of keys during a VDE Organizer autotest sequence:
/ 
Sets Organizer option or set value in selected (highlighted) item.
ESC Cancels VDE sequence and returns to Main menu.
TEST Starts / repeats selected measurement or proceeds to next step.
After the test sequence is finished the instrument proceeds to the 'Autotest Result' menu.
For more information refer to chapter 7 Working with Autotest results.
Note:

If any of the inspections are marked as failed or if any test fails the test sequence is
stopped and the instrument automatically goes to the Result menu.
Visual inspection
Measurement is described in chapter 5.2.1 Visual inspection.
Options in Visual test:
PASS / FAIL
Earth continuity resistance measurement
The test is offered if it is applicable according to the VDE Organizer setting.
The measurement is described in chapter 5.2.2 Earth continuity resistance.
9. Options in Earth continuity starting screen:
/ 
Sets Organizer optio Sets power cord length.
10.
Note:
11.

Earth continuity resistance limit is automatically set on base of set cord length.
Options in Earth continuity result screen:
13.
NEXT
REPEAT
Figure 0.55: VDE Organizer – Visual inspection menu
To be applied manually.
8.
Figure 0.56: VDE Organizer – Earth continuity starting screen
12.
Figure 0.57: VDE Organizer – Earth continuity result screen
Proceeds to next step.
Repeats the test (in case of multiple earthed points). Highest result will
be stored.
104
Autotest sequences