®
Testboy
TV 465
Polarity test
10.1.17
This test checks the polarity of supply cords. The following faults can be detected:
L OPEN, N OPEN, PE OPEN, L-N CROSS and MULTIPLE FAULT.
Test circuit for polarity test
Polarity test procedure
Select the POLARITY function.
Connect the IEC cord to the instrument as shown on figure 5.20.
Press the TEST key for measurement.
Store the result by pressing MEM key (optional).
Displayed results:
Main result ............. PASS/FAIL, description of fault
Note:
Consider any displayed warnings before starting test!
Figure 0.48: Polarity test menu
Figure 0.49: Polarity test of IEC cord
Figure 0.50: Examples of polarity test result
100
Single test