Code Autotest - TESTBOY TV 465 PRO Bedienungsanleitung

®
Testboy TV 465
o

Code Autotest

Code Autotest menu supports operation with pre-defined test codes, barcodes and RFID
tags.
The instrument supports the following functions:

manual selection of pre-defined autotest shortcut codes;

reading pre-defined autotest shortcut codes from barcode labels;

reading pre-defined autotest shortcut codes from RFID tags;

reading appliance ID numbers from barcode labels;

reading appliance ID numbers from RFID tags;

reading pre-defined autotest shortcut codes and appliance ID numbers from
barcode labels (double barcode format);

programming empty RFID tags.
Refer to Appendix A Barcode formats for more information regarding barcode labels.
Reading a Code autotest sequence (with barcode reader, RFID reader/writer or
manually)
Connect barcode reader or RFID reader/writer to the instrument RS232 / PS2 connector
first.
Figure 0.69: Connection of the barcode reader and RFID reader/writer
Select Code Autotest in Main menu. The latest received or set autotest sequence name
and its code is displayed. A new autotest sequence (received from the barcode reader or
RFID reader/writer) will be accepted by the instrument (refer to Appendix for available
autotest sequences and its codes). A successful receive of the barcode or RFID tag is
confirmed by two short confirmation beeps.
The autotest sequence and its code can be also set manually.
Keys:
 / 
Manually selects autotest sequence by setting its code.
Starts selected autotest sequence. Refer to chapter 6.5 Carrying out
TEST
(Code, Simple and Custom) autotest sequences.
ESC Returns to Main menu.
Figure 0.70: Code autotest menu
109
Autotest sequences