Custom Autotest; Simple Test - TESTBOY TV 465 PRO Bedienungsanleitung

®
Testboy TV 465
o

Custom autotest

In the autotest custom menu user-defined autotest procedures can be performed via the
PC SW TV 465. Up to 50 custom autotest sequences can be pre-programmed in this
autotest mode.
Commonly used pre-programmed autotest sequences are added to the list by default.
The custom sequences can be also uploaded from the PC software PC SW TV 465.
Refer to chapter 8 Communication for more information.
New custom sequences
Refer to chapter 7 Working with autotest results for more information.
The pre-programmed sequences can be restored to default settings by selecting Initial
settings in Setup menu.
Select Custom Autotest function in Main menu.
Keys:
 / 
Selects the custom autotest.
START Starts the selected custom autotest. See chapter 6.5 Carrying out (Code,
Simple and Custom) autotest sequences.
ESC Returns to Main menu.
Note:

If more than 50 autotests are saved, »Out of custom autotest memory« message is
displayed.
o

Simple test

Simple test sequences are commonly used pre-programed autotest sequences with
possibility of fast testing. Fast testing mode can be enabled in Test speed setup function in
Setup menu. Refer to chapter 4.8.5 Test speed setup for more information.
Select Simple test function in Main menu.
Keys:
 / 
Selects the test sequence from the list
START Starts the selected test. See chapter 6.5 Carrying out (Code, Simple and
Custom) autotest sequences.
ESC Returns to Main menu.
Note:

Limits of the CLASS I, II and III tests are shown in Appendix D
can be also
Figure 0.67: Custom autotest menu
Figure 0.68: Simple test menu
108
uploaded from
Autotest sequences
the VDE Organizer.