®
Testboy
TV 465
10.1.9 Instrument data
In this menu the following instrument data is shown:
producer name;
instrument type;
model number;
calibration date;
serial number;
firmware and hardware version.
Keys:
/
Switches between Instrument data screens.
TEST,
Returns to Setup menu.
ESC
Initial settings
10.1.10
In this menu the following instrument parameters can be set to their initial values:
all measurement parameters in single test mode;
LCD settings;
test speed setting;
language;
user data;
appliances names;
custom autotest sequences are replaced by factory pre-programmed ones.
Keys:
TEST
Confirms selection and returns to Main menu.
ESC
Returns to Setup menu without changes.
Figure 0.28: Instrument data menu
Figure 0.29: Initial settings menu
91
Main menu and test modes